Konica-minolta BIZHUB C360 Bedienungsanleitung PDF herunterladen (Seite 32)

bizhub C360/C280/C220 3-9

3.2 [Basic]

3.2.5 [Finishing]

Various settings can be selected for sorting and finishing copies fed into the Output Tray.

0 The "Staple" setting is available only if the optional finisher is installed.

0 The "Punch" setting is available only if the punch kit is installed on the optional Finisher FS-527.

0 The Half Fold and Center Staple & Fold functions are available only when the saddle stitcher is installed

on the optional Finisher FS-527.

0 [Staple] cannot be used together with [Offset].

0 [Half-Fold] and [Center Staple & Fold] cannot be used together with [Offset], [Staple], or [Punch].

% Press [Basic] ö [Finishing].

[Combine] [2in1] Select this setting to print two original images on

one sheet of paper.

[No] Select this setting to make no combined copy.

[Original Direction] When scanning double-sided originals or configuring double-sided or

combined copy settings, specify the direction of the original to be loaded.

For details, refer to page 3-15.

[Original Binding Pos.] When you have selected [2-Sided > 1-Sided] or [2-Sided > 2-Sided], enter

the original binding position. For details, refer to page 3-13.

[Output Bind Direction] When you have selected [1-Sided > 2-Sided] or [2-Sided > 2-Sided], enter

the copy binding position. This can arrange the images in the front page

and back page in the correct orientation.

•[Auto]:

The copy binding position is automatically set either at the top or at the

left. A copy binding position along the long side of the paper is selected

if the original length is 11-11/16 in (297 mm) or less. A copy binding po-

sition along the short side of the paper is selected if the original length

exceeds 11-11/16 in (297 mm).

[Main Screen] Press this button to return to the basic settings screen with the changed

settings applied.

Settings

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 62 63

Keine Kommentare

Konica-minolta BIZHUB C360 Bedienungsanleitung Seite 32