Konica-minolta bizhub 160 Bedienungsanleitung Seite 135
- Seite / 150
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
6
6.11 The machine is not functioning as designed
6-30 bizhub 160
When a Message Appears Chapter 6
6.11 The machine is not functioning as designed
* If the problem is not corrected even after the operations described are performed, turn off the machine,
unplug its power cord, and then contact the service representative.
Symptom Possible Cause Action
Nothing appears in the Display. Is only the [Start] key lit green? The Energy Save mode is
enabled. Press any key on the
Control Panel to cancel Energy
Save mode.
Has the machine been turned
on?
Check that the power cord is
firmly connected and that the |
(on) side of the Power Switch
has been pressed.
Is the contrast of the Display too
light?
From the “MACHINE
SETTING” menu of the Utility
mode, adjust the Display to the
correct contrast. Refer to
“Specifying the Setting for “LCD
CONTRAST”” on page 5-9.
The [Start] key indicator does not
light up green.
The machine has just been
turned on and is warming up.
It takes the machine less than
25 seconds to be ready to make
copies after it has been turned
on.
Please wait.
The machine does not operate
when it is turned on.
The power cord is left
unplugged.
Plug the power cord into the
power outlet.
The room’s circuit breaker is
open.
Close the room’s circuit
breaker.
- User’s Guide 1
- Contents 2
- 3 Before Making Copies 3
- 4 Making Copies 4
- 5 Using the Utility Mode 4
- 6 When a Message Appears 5
- 7 Miscellaneous 6
- Contents 7
- Introduction 8
- 1.1 Safety Information 9
- Introduction Chapter 1 10
- 1.2 Regulation Notices 16
- 1.3 Energy Star 22
- Precaution 26
- 2.1 Installation Precautions 27
- Precaution Chapter 2 28
- 2.2 Operation Precautions 29
- Before Making 32
- 3.1 Available Features 33
- 3-4 bizhub 160 35
- Main Unit 35
- 3-6 bizhub 160 37
- Inside the Machine 37
- For Legal-size paper 38
- For Letter-size paper 38
- For A4-size paper 38
- 3-8 bizhub 160 39
- Mechanical Counter MC-502 40
- Paper Feed Unit PF-501 40
- 3.4 Control Panel 41
- Display Indications 42
- G Number of copies: 1 44
- G Image density: TEXT Auto 44
- G Paper: Tray1 44
- G Finishing: Non-Sort 44
- 3.6 Useful Functions 45
- 3.7 Copy Paper 47
- <Bypass Tray> 50
- <Tray1> 50
- 3.8 Loading Originals 55
- 2 Slide the front adjustable 56
- ❍ “Making Copies” on page 4-1 58
- 1 Press the [Status] key 61
- 2 Press the [Yes] key 61
- “TOTAL SCAN” values 62
- 3.10 Print Area 63
- Making Copies 64
- 4.1 Making a Basic Copy 65
- 4 Specify the image density 66
- 6 Press the [Start] key 66
- 4.2 Selecting the Paper 67
- 1 Position the original 68
- 5 Press the [Yes] key 68
- Making Copies Chapter 4 69
- Bypss Tray 70
- 8 Press the [Yes] key 71
- 10 Press the [Yes] key 71
- 4.3 Specifying the Zoom Ratio 73
- 4.5 Making 2in1 Copies 77
- 4.6 Finishing Copies 78
- Using the Utility 80
- 5.1 Utility Mode 81
- 1 Press the [Utility] key 82
- 1 Select “AUTO PANEL RESET” 83
- 4 Press the [Yes] key 83
- 1 Select “ENERGY SAVE MODE” 84
- 1 Select “DENSITY (ADF)” 85
- 1 Select “DENSITY (BOOK)” 86
- 1 Select “PRINT DENSITY” 87
- 1 Select “LCD CONTRAST” 88
- 1 Select “LANGUAGE” 89
- 1 Select “LAMP OFF TIME” 90
- 6 Press the [Yes] key 93
- 1 Select “TRAY SETTING” 95
- MANAGEMENT” Menu) 96
- 1 Select “PAPER PRIORITY” 99
- 1 Select “DENSITY PRIORITY” 100
- 3 Press the [Yes] key 100
- 1 Select “DENSITY LEVEL (A)” 101
- 1 Select “DENSITY LEVEL (M)” 102
- 1 Select “OUTPUT PRIORITY” 103
- 1 Select “RESOLUTION” 104
- 5-26 bizhub 160 105
- 5.5 Specifying Copy Settings 105
- When a Message 106
- Paper tray 107
- Paper size 107
- 1 Remove the Bypass Tray 108
- <Toner nearly empty> 110
- <Toner empty> 110
- 1 Open the Front Cover 111
- Developer roller 113
- 9 Close the Front Cover 114
- 7 Close the Front Cover 117
- 2 Remove the Bypass Tray 118
- Fusing Section> → Step4 122
- 6 Close the Fuser Cover 124
- 1 Open the Document Feeder 125
- 1 Select “TRAY1 PAPER” 127
- 6-26 bizhub 160 131
- 6-28 bizhub 160 133
- 6-30 bizhub 160 135
- Miscellaneous 136
- 7.1 Specifications 137
- Miscellaneous Chapter 7 138
- 7.2 Care of the Machine 139
- Index Chapter 8 146
- Printed in China 150
- 4980-7102-01 150
- P/N:91164C161H011 150
Verwandte Produkte und Handbücher für Drucker Konica-minolta bizhub 160
Drucker Konica-minolta 7920 Bedienungsanleitung
(40 Seiten)
(40 Seiten)
(96 Seiten)
(47 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.362 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern