Konica-minolta bizhub 160 Bedienungsanleitung Seite 81
- Seite / 150
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
5
5.1 Utility Mode
5-2 bizhub 160
Using the Utility Mode Chapter 5
5.1 Utility Mode
There are four menus in the Utility mode.
5.2 Specifying the Machine Settings
From the “MACHINE SETTING” menu, various settings for the machine’s operating
environment can be specified. Refer to the following table for details on each
function.
No. Name Description
1 MACHINE SETTING Used to specify settings for the machine’s operating environment.
2 PAPER SOURCE
SETUP
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
3 USER MANAGEMENT Used to specify settings after the drum cartridge is replaced.
4 COPY SETTING Used to specify the default settings for each copy function.
5 NETWORK SETTING Available only if the optional Network Interface Card NC-501 is
installed. For details, refer to the User’s Guide for the Network Interface
Card NC-501.
No. Name Description
1 AUTO PANEL RESET Whether the Auto Panel Reset function is disable or the time (0.5 min,
1 min, 2 min, 3 min, 4 min, or 5 min) until the machine is reset after
finishing copying/printing or after performing the last operation can be
selected. If the Auto Panel Reset function is enabled, all functions are
automatically reset to their default settings.
• The factory default setting is 1 min.
2 ENERGY SAVE
MODE
If the machine performs no operations for a set length of time, it will
automatically enter the Energy Save mode. The length of time until the
machine enters Energy Save mode can be set between 1 and 240 min
(in 1 min increments).
• The factory default setting is 15 min.
3 DENSITY (ADF) The scanning density when using the Automatic Document Feeder can
be adjusted.
Mode 1: For printing lighter copies of dark documents to avoid
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The factory default setting is “Mode 1”.
4 DENSITY (BOOK) The density when scanning from the Original Glass can be adjusted.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid
darkening of copies.
• The factory default setting is “Mode 1”.
5 PRINT DENSITY The copy/print density can be adjusted to one of six levels between –3
and +2. With the normal print density at 0, choose a smaller number for
a lighter print or choose a higher number for a darker print.
• The factory default setting is “0” (Normal).
6 LCD CONTRAST The brightness of the display can be set to one of four levels between
–1 and +2.
• The factory default setting is “0” (Normal).
- User’s Guide 1
- Contents 2
- 3 Before Making Copies 3
- 4 Making Copies 4
- 5 Using the Utility Mode 4
- 6 When a Message Appears 5
- 7 Miscellaneous 6
- Contents 7
- Introduction 8
- 1.1 Safety Information 9
- Introduction Chapter 1 10
- 1.2 Regulation Notices 16
- 1.3 Energy Star 22
- Precaution 26
- 2.1 Installation Precautions 27
- Precaution Chapter 2 28
- 2.2 Operation Precautions 29
- Before Making 32
- 3.1 Available Features 33
- 3-4 bizhub 160 35
- Main Unit 35
- 3-6 bizhub 160 37
- Inside the Machine 37
- For Legal-size paper 38
- For Letter-size paper 38
- For A4-size paper 38
- 3-8 bizhub 160 39
- Mechanical Counter MC-502 40
- Paper Feed Unit PF-501 40
- 3.4 Control Panel 41
- Display Indications 42
- G Number of copies: 1 44
- G Image density: TEXT Auto 44
- G Paper: Tray1 44
- G Finishing: Non-Sort 44
- 3.6 Useful Functions 45
- 3.7 Copy Paper 47
- <Bypass Tray> 50
- <Tray1> 50
- 3.8 Loading Originals 55
- 2 Slide the front adjustable 56
- ❍ “Making Copies” on page 4-1 58
- 1 Press the [Status] key 61
- 2 Press the [Yes] key 61
- “TOTAL SCAN” values 62
- 3.10 Print Area 63
- Making Copies 64
- 4.1 Making a Basic Copy 65
- 4 Specify the image density 66
- 6 Press the [Start] key 66
- 4.2 Selecting the Paper 67
- 1 Position the original 68
- 5 Press the [Yes] key 68
- Making Copies Chapter 4 69
- Bypss Tray 70
- 8 Press the [Yes] key 71
- 10 Press the [Yes] key 71
- 4.3 Specifying the Zoom Ratio 73
- 4.5 Making 2in1 Copies 77
- 4.6 Finishing Copies 78
- Using the Utility 80
- 5.1 Utility Mode 81
- 1 Press the [Utility] key 82
- 1 Select “AUTO PANEL RESET” 83
- 4 Press the [Yes] key 83
- 1 Select “ENERGY SAVE MODE” 84
- 1 Select “DENSITY (ADF)” 85
- 1 Select “DENSITY (BOOK)” 86
- 1 Select “PRINT DENSITY” 87
- 1 Select “LCD CONTRAST” 88
- 1 Select “LANGUAGE” 89
- 1 Select “LAMP OFF TIME” 90
- 6 Press the [Yes] key 93
- 1 Select “TRAY SETTING” 95
- MANAGEMENT” Menu) 96
- 1 Select “PAPER PRIORITY” 99
- 1 Select “DENSITY PRIORITY” 100
- 3 Press the [Yes] key 100
- 1 Select “DENSITY LEVEL (A)” 101
- 1 Select “DENSITY LEVEL (M)” 102
- 1 Select “OUTPUT PRIORITY” 103
- 1 Select “RESOLUTION” 104
- 5-26 bizhub 160 105
- 5.5 Specifying Copy Settings 105
- When a Message 106
- Paper tray 107
- Paper size 107
- 1 Remove the Bypass Tray 108
- <Toner nearly empty> 110
- <Toner empty> 110
- 1 Open the Front Cover 111
- Developer roller 113
- 9 Close the Front Cover 114
- 7 Close the Front Cover 117
- 2 Remove the Bypass Tray 118
- Fusing Section> → Step4 122
- 6 Close the Fuser Cover 124
- 1 Open the Document Feeder 125
- 1 Select “TRAY1 PAPER” 127
- 6-26 bizhub 160 131
- 6-28 bizhub 160 133
- 6-30 bizhub 160 135
- Miscellaneous 136
- 7.1 Specifications 137
- Miscellaneous Chapter 7 138
- 7.2 Care of the Machine 139
- Index Chapter 8 146
- Printed in China 150
- 4980-7102-01 150
- P/N:91164C161H011 150
Verwandte Produkte und Handbücher für Drucker Konica-minolta bizhub 160
Drucker Konica-minolta 7920 Bedienungsanleitung
(40 Seiten)
(40 Seiten)
(96 Seiten)
(47 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.804 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern