Konica-minolta BIZHUB C30P Bedienungsanleitung PDF herunterladen (Seite 27)

Selecting Driver Options/Defaults (for Windows)

Selecting Driver Options/Defaults

(for Windows)

Before you start working with your printer, you are advised to verify/change

the default driver settings. Also, in case you have options installed, you

should “declare” the options in the driver.

Windows XP/Server 2003/2000/NT 4.0

1 Choose the driver’s properties as follows:

– (Windows XP/Server 2003)

From the Start menu, choose Printers and Faxes to display the

Printers and Faxes directory. Right-click the KONICA MINOLTA

bizhub C30P PCL6 or KONICA MINOLTA bizhub C30P PS printer

icon and choose Properties.

– (Windows 2000/NT 4.0)

From the Start menu, choose Settings and then Printers to display

the Printers directory. Right-click the KONICA MINOLTA bizhub C30P

PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose

Properties.

– PostScript printer driver for Windows NT 4.0 is not supported.

2 If you have installed options, proceed with the next step. Otherwise, skip

to step 9.

3 Select the Configure tab.

4 Check that the installed options are correctly listed. If not, proceed with

the next step. Otherwise, continue with step 8.

5 Click the Refresh to automatically configure installed options.

" The Refresh is available only if bi-directional communication is

available with the printer; otherwise it is grayed out.

6 From the Device Options list, select an option, one at a time, and then

select Enable or Disable from the Settings menu.

" If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or

1024 MB, according to the installed memory. The factory default

setting is 256 MB.

" If Memory Card is selected, select Disable, Enable (1 GB

Under), or Enable (1 GB Over), according to the installed Com-

pactFlash card.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 275 276

Keine Kommentare

Konica-minolta BIZHUB C30P Bedienungsanleitung Seite 27