Konica-minolta Magicolor 5440 DL Bedienungsanleitung Seite 117

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 284
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 116
Menu (magicolor 5430 DL /5440 DL) Main Unit Field Service
3-14
III
Adjustment/Setting
4.4 ENGINE
4.4.1 ENGINE TONER EMPTY
4.4.2 ENERGY SAVER
4.4.3 AUTO CONTINUE
4.4.4 TRAY CHAINING
Function Specifies whether to stop or continue printing when a toner empty condition is
detected.
Use To specify whether to permit printing upon a toner empty condition.
Setting
/procedure
The setting can be changed during printing.
The default setting is “STOP.
STOP CONTINUE
Function Sets the amount of time before the machine enters Energy Saver mode after the last
print is received or the last key operated.
The Energy Saver mode is automatically canceled when any of the following opera-
tions is performed:
The machine is restarted.
A print job is received.
Any of the keys on the Control Panel is pressed.
The Front Door or Right Door is opened and closed.
A Tray is opened, then closed.
Use To change the amount of time before the machine enters Energy Saver mode.
Setting
/procedure
The default setting is “30 MINUTES.
15 MINUTES 30 MINUTES 1 HOUR 2 HOURS
Function Enables or disables printing when the size of the media loaded in the tray does not
match that of the print data.
Use To select whether to print data on media of another size when the size of the media
loaded in the tray does not match that of the print data.
Setting
/procedure
The setting can be changed during printing; however, the change is applied begin-
ning with the next job.
The default setting is “ON.
ON OFF
Function Enables or disables printing when the current tray runs out of media during the print
cycle by automatically selecting another one loaded with the media of the same size
and type.
The setting is available only when an optional Lower Feeder Unit is installed.
Use
Setting/
procedure
The setting can be changed during printing; however, the change is applied begin-
ning with the next job.
The default setting is “ON.
ON OFF
5450_E.book_PDF.book 14 ページ 2005年4月12日 火曜日 午後12時54分
Seitenansicht 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 283 284

Kommentare zu diesen Handbüchern

Keine Kommentare