Konica-minolta Magicolor 5440 DL Bedienungsanleitung Seite 172

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 284
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 171
Main Unit Field Service Menu (magicolor 5450)
3-69
III
Adjustment/Setting
7.7.5 AUTO CONTINUE
7.7.6 HOLD JOB TIMEOUT
7.7.7 ENERGY SAVER
Function At the time of the following Operator Call, continues auto printing by ignoring the
media type or size.
“PAPER EMPTY” (except “MANUAL FEED”), “xxxx SIZE ERROR”, “xxxx TYPE
ERROR”.
Use To specify whether printing should continue when the specified media size and type are
not available.
Setting
/procedure
ON: Auto continuous printing is ON.
OFF: Auto continuous printing is OFF.
1. Select “AUTO CONTINUE” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.
The default setting is “ON.
ON OFF
Function Sets the amount of time before a job saved temporarily in the printer is automatically
deleted.
Use To change the amount of time a job is held before being deleted.
Setting
/procedure
1. Select “HOLD JOB TIMEOUT” and press the MENU/SELECT key.
2. Select “Desired auto delete time” with the Up keyU/Down keyV and press the
MENU/SELECT key.
The default setting is “DISABLE.(No auto delete.)
DISABLE 1 hour 4 hours 1 day 1 week
NOTE
This menu is available only when an optional Hard Disk unit is installed.
Function Sets whether the printer should go into Energy Saver mode when not printing or pro-
cessing a print job and when the Control Panel is not being used. To set the amount
of time before Energy Saver mode is activated, use the “ENERGY SAVER TIME”
menu.
Energy Saver mode is automatically canceled when any of the following operations is
performed:
The machine is restarted.
A print job is received.
Any of the keys on the Control Panel is pressed.
The Front Door or Right Door is opened and closed.
Use To specify whether Energy Saver mode is to be used.
Setting
/procedure
1. Select “ENERGY SAVER” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.
The default setting is “ON.
ON OFF
5450_E.book_PDF.book 69 ページ 2005年4月12日 火曜日 午後12時54分
Seitenansicht 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 283 284

Kommentare zu diesen Handbüchern

Keine Kommentare