Konica-minolta Polygon Editing Tool Bedienungsanleitung PDF herunterladen (Seite 60)

Chapter

File

910

File – Import – Digitizer – Step Scan (When VIVID 910 is Selected)

Performing Step Scan with the VIVID 910

This command is used to cause the VIVID 910 (VI-910) to make multiple shots of the object by controlling

the rotary stage remotely from this software. Registration of multiple scan data can be performed using the Calibra-

tion Chart for extract center of rotation.

Warning

Never stare into the laser emitting window.

Do not place a lens, mirror or optical element in the passage of the laser beam. Doing so may converge the

laser beam, resulting in damage to your eyes, burns or re. To prevent the above accidents, make sure that a

wall or similar which can block the laser beam is located behind the object.

n When Using Only the Rotating Stage

Operating Procedure

From the [File] menu, select [Import],

[Digitizer] and then [Step Scan].

The [File-Import-Digitizer-Step Scan] dialog

box will appear.

emo

• The calibration chart is an accessory of the rotating

stage set.

• Before performing the procedure below, make sure that

the digitizer you are going to use is selected by the File

– Select Digitizer command.

Ref.

For details, refer to parameters (P.144) for [File-

Import-Digitizer-Step Scan-Option] dialog box.

• The monochrome monitor image captured by the

VIVID 910 will appear in the Work window area

of the dialog box.

• If the Model folder contains the Chart data that is

considered to be appropriate, it will be imported

automatically.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 269 270

Keine Kommentare

Konica-minolta Polygon Editing Tool Bedienungsanleitung Seite 60