Konica-minolta Polygon Editing Tool Bedienungsanleitung PDF herunterladen (Seite 62)

Chapter

File

910

File – Import – Digitizer – Step Scan (When VIVID 910 is Selected)

Set optional parameters.

Item Explanation

Scan Parameter

Sets the settings for scanning.

Convert Parameter Sets the settings for three-

dimensionalization.

Stage Parameter Select the rotary stage to be

used.

[Default] button Clicking this restores the

default settings.

Ref.

For details, refer to the parameters (P.66) for [File-

Import-Digitizer-Step Scan-Option] dialog box.

Click the [Apply] button to check

whether the rotary stage has been ini-

tialized successfully.

If the rotary stage has been initialized success-

fully, the [Scan] button will be effective.

• If initialization is not successful, turn off the

power to the rotary stage power, turn it on again,

and then click on the [Apply] button.

• Select “Free” for [Rotation Step] in [Stage Param-

eter] eld, and click [Apply]. If the stage has been

recognized properly, a stage slide bar and [Chart

Scan] button will be displayed at the bottom of

the work window when the [File-Import-Digitizer-

Step Scan-Option] dialog box is closed.

After necessary settings are made,

click the [OK] button.

The settings will be set and the [File-Import-

Digitizer-Step Scan-Option] dialog box will

close.

• If the rotary stage has already been used and if there

is no need to change the settings, initialization of the

rotary stage can be performed by clicking on the [Stage

Apply] button in the [File-Import-Digitizer-Step Scan]

dialog box instead of the [File-Import-Digitizer-Step

Scan-Option] dialog box.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 269 270

Keine Kommentare

Konica-minolta Polygon Editing Tool Bedienungsanleitung Seite 62